The BEST things in life are FREE!
- FREE Quotation Service
- FREE Valuation Service
- FREE Advice
|
|
What can I help you with? |
| Do you need a brochure? |
| Is it a free quote you're after? |
| Can I help you with a technical question? |
| Do you need a sample of a product? |
 |
| NoiseStop Systems Monar Floor Deck 18 |
|
Monarfloor® Deck 18 system is designed to reduce sound transmission through existing timber floors in situations where finished floor height is not critical.
Monarfloor Deck 18 consists of a layer of 8mm LRAC foam bonded to 18mm P5 V313 moisture resistant chipboard.
When installed as part of a complete sound reduction system it enables a timber floor to meet the sound transmission regulations of Part E (see table).
Monarfloor Deck 18 sound transmission performance |
|
DnT,w + Ctr |
L'nT,w |
Treated floor |
49dB |
49dB |
Monarfloor Deck 18 Product Data |
Overall board dimensions |
2400mm x 600mm x 26mm thick |
Foam thickness |
8mm |
Foam composition |
Recycled Low Resonance type II Acoustic Chip (LRAC) foam |
Specification
The acoustic insulant shall be:
Monarfloor Deck 18, manufactured by Icopal Ltd, Lyon Way, St Albans, Hertfordshire, AL4 0LB.
Install Monarfloor Deck 18 in accordance with relevant specification clauses and design details.
Installation
- Fix Monarfloor Acoustic Flanking Band at the floor perimeter.
- Lay Monarfloor Deck 18 over existing floor boards, in broken bond pattern, applying adhesive to all tongued and grooved panel joints.
- Install skirting and trim off excess Flanking Band.
|
|
