NoiseStop Systems NoiseDeck 32

The BEST things in life are FREE!

FREE Quotation Service
FREE Valuation Service
FREE Advice

What can I help you with?

Do you need a brochure?

Is it a free quote you're after?

Can I help you with a technical question?

Do you need a sample of a product?

NoiseStop Systems NoiseDeck 32

NoiseStop Systems NoiseDeck 32 is designed to reduce sound transmission through existing applications.

NoiseStop Systems NoiseDeck 32 consists of 18mm moisture resistant chipboard bonded to a triple layer acoustic composite.

NoiseStop Systems NoiseDeck 36 sound transmission performance [performance figures are currently estimated as trials continue]
	D_nT,w + C_tr	L'_nT,w
Treated floor	52dB	52dB

NoiseStop Systems NoiseDeck 36 Product Data
Overall board dimensions	2400mm x 600mm x 32mm thick
Resilient layer	15mm
Resilient layer composition	Acoustic Foam / High Mass Polymer / Acoustic Foam

When installed as part of a complete sound reduction system it enables a timber floor to meet the sound transmission regulations of Part E (see table).

The acoustic insulation shall be:

Specification

NoiseStop Systems NoiseDeck 32 on 22mm chipboard on 225 x 50mm timber joists at 400mm centres packed with 100mm of 45kg/m³ insulation with a 25mm double boarded ceiling

Installation

Fix NoiseStop Isolation Tape, for acoustic flanking resistance, at the floor perimeter.

Lay NoiseStop Systems NoiseDeck 32 over the structural floor, in staggered broken bond pattern, generously applying adhesive to all tongued and grooved panel joints.

Install skirting.

Materials Required

NoiseStop NoiseDeck 32

NoiseStop Isolation Tape

DFM100 (45kg/m)

General Notes

If you require information on any of our products please visit our website on www.noisestopsystems.co.uk, where a full specification sheet can be downloaded.

If you feel this system is not what you require then please contact us on 0845 1 30 62 69 to discuss this further. We can supply a wide range of systems and products to suit most needs.

Please note the purchase of any materials from NoiseStop Systems is subject to our standard terms and conditions. All quantities stated should be used as a guide and we recommend you confirm the required quantities before ordering.