The BEST things in life are FREE!
- FREE Quotation Service
- FREE Valuation Service
- FREE Advice
|
|
What can I help you with? |
| Do you need a brochure? |
| Is it a free quote you're after? |
| Can I help you with a technical question? |
| Do you need a sample of a product? |
 |
| NoiseStop Systems NoiseStop Isolation Mat |
|
This excellent new product is at the forefront of sound reduction technology. Its multi-use, versatility and cost effectiveness make it usable by all. Good as a stand alone product the barrier shield offers very good reduction values.
A high density mat, this flexible material can be used in any situation offering a sound reduction similar to that of a sheet of lead, except it is far superior in terms of versatility, availability, cost and handling.
| Density |
780kg/m³ |
|
|
|
| Tile
Size |
1000mm
x 1000mm + 1.5% |
|
|
|
| Available
Thicknesses |
3mm
to 10mm |
|
|
|
| Tensile
Strength |
1.4N/mm² B.S. 903/2A |
|
|
|
| Elongation
at Break |
80% min B.S. 903/2A |
|
|
|
| Hardness |
60˚ Shore A |
|
|
|
| Durability |
Amendment
N˚2 to B.S. 5696 Part 3 advises that the wear index should not be greater
than 1.0 and the wear ratio should be between 1.0 and 3.0 |
Wear Index
(G/1000 Revs) |
Unaged |
Air Aged |
Water
Aged |
U.V. Aged |
| |
0.18 |
0.19 |
0.25 |
0.18 |
| Wear Ratio |
1.29 |
1.36 |
1.14 |
1.20 |
| Slip Resistance |
B.S.
7188 (Recommend minimum value of 40) |
| |
Dry |
Wet |
|
|
| |
63-68 |
52-56 |
|
|
| Flammability |
B.S.
4790 (Hot metal nut test) |
|
|
|
| |
Time
from application of nut to extinction 383-425 seconds. |
|
|
|
| |
Greatest
radius of affected area 19-20mm |
|
|
|
| |
Classification
LOW radius of ignition |
|
|
|
| Thermal
Stability |
Thermal expansion from 20˚
to 50˚C is 0.5% |
|
|
|
| |
Thermal
expansion from 50˚ to 80˚C is 1% |
|
|
|
(NOTE) If sheets are adhered well to substrate, thermal expansion is only in the vertical mode)
U.V. Stability B.S.1006 Light Fast to 7
(lifespan dependent of type of surface wear/application and location).
Permiability Rypol is porous, flow rates are determined by the type of base substrate on which tiles are laid.
(Nominal 50 LTS/m² at 0.2 bar)
Without covering |
|
Thickness |
∆Lw |
3mm |
18dB |
5mm |
20dB |
Sound Damping Up to 30dB reduction
Please note: The above data does not form part of any guarantee. Information given as a guideline based on test results found by reputable test houses. |
|
