Home soundproofing Solutions

Soundproofing Homes Solutions - Suitable for Domestic or Business Application

Noise Stop Systems - Sound Proofing Homes Solution Options

More and more houses are built within close proximity to maximise the development space. This is not generally a problem if your neighbours aren’t noisy or considerate of others feelings. But when you have to cope with noise problems for any period, you can start to suffer from lack of sleep and being unable to relax in your own home.

You can also suffer if your house is located close to airborne noise sources such as heavy road traffic, motorway, railway track, pub, clubs, entertainment venue and aircraft flight path. You can reduce the sound transmission from external noise source and impact noise within your own home, using one or more of our soundproofing products.

We have several soundproofing systems that are use in ceiling, floors, machinery and walls applications. All of our products will reduce the noise problem to an acceptable level no louder than background ambient noise.
If you are experiencing a noise nuisance problem, we are happy to help you get the right soundproofing solution for your home.

Below is a list of recommend products and materials that are compliant with Building Regulations Approved Document E (2003) and offers the greatest sound reduction.

If you need any help please call 08451 306 269 and one of our Technical Staff will be happy to help you.

NSSC1+ Buy Now | More Info

18 mm two layer laminated panel of acoustic mineral board / impregnated rubber membrane. Full tech spec & attenuation below (traditionally approx. 100 mm) The resultant panel, when applied using the NoiseStop System, is equivalent to an acoustic media of 100 mm thickness.

NSSC1 (100kg/m3) Buy Now | More Info

The resultant panel, when applied using the NoiseStop System, is equivalent to an acoustic media of 50mm thickness . The NoiseStop System method statement must be adhered to in its entirety.

Accredited tests have shown a reduction of 27db.
The panels should be skimmed and then brought to required decorative order.

DFM 50 (140kg/m3) Buy Now | More Info

DFM has been proven over many years to be the ideal Soundproofing insulation material for all applications where noise attenuation or noise absorption is needed - in Soundproofing in the home / domestic, commercial, manufacturing, industrial and environmental situations. In addition to its acoustic properties, its well known thermal insulation and fire protection performance are inherent benefits. Thickness' of 25, 50, 75, 100 and 200mm are available. Prices vary accordingly. The most commonly used is the 50mm when applied inside 2"x2" stud work in wall partition constructions.

SoundBreaker Bars Buy Now | More Info

Dense Fibre Matting 100mm Buy Now | More Info

DFM products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies. Effective sound insulation is an essential requirement for modern life styles. Excessive noise can increase stress, hinder speech and can cause its own form of environmental pollution.

NoiseDeck 36- Buy Factory Direct - Please Call: 08451 306 269 | More Info

Noise Deck 36 is designed for direct to joist construction.
This product can be used in building regulations systems where it is required to replace the floor. For best results we recommend within a NoiseStop Systems system.

SoundBreaker Bars Buy Now | More Info

Can help to reduce transmission of sound between floors and ceilings when using traditional plasterboard ceilings. Also helpful when needing to separate NoiseStop panels from wall structures. The bars are available in 3m lengths, 70mm wide by 15mm deep.

Isolation Tape Buy Now | More Info

Available in 20mm or 30mm widths, 5mm thick and 12 metres in length. This isolation tape can be used around the edges of the room to separate acoustic floors from walls. Under partitions to reduce sound transmission. Or even on joists beneath structural floors. Your uses are endless!

Ideal for use with many Soundproofing products at a very low cost.

NSSW1+ Buy Now | More Info

18 mm Soundproofing wall board with two layer laminated panel of acoustic mineral board / high density, impregnated, sound reductive rubber membrane. Full tech spec & attenuation below (traditionally approx. 100 mm).

The resultant panel, when applied using the NoiseStop System Soundproofing method, is equivalent to an traditional acoustic infill of 100 mm thickness. The NoiseStop System method statement must be adhered to in its entirety to achieve the best sound proofing results.

Accredited tests have shown a reduction of 37db.
The panels should be skimmed and decorate to your requirement.

Dense Fibre Matting (DFM) 50 (140kg/m3) Buy Now | More Info

An acoustic rock mineral wool slab bonded with a high performance binder, suitable for use in many applications including floors, walls, ceilings, roofs and many others. Dense Fibre Matting (DFM) products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies. DFM has been proven over many years to be the ideal insulation material for all applications where noise attenuation or noise absorption is needed; in domestic, commercial, manufacturing, industrial and environment situations. This product is ideal for use as a stand alone infill in stud framework of walls, floor joists and occasionally suspended ceilings.  Its main purpose is to reduce airborne noise.

SoundBreaker Bars Buy Now | More Info