NSSW1+

18 mm Soundproofing wall board with two layer laminated panel of acoustic mineral board / high density, impregnated, sound reductive rubber membrane. Full tech spec & attenuation below (traditionally approx. 100 mm)

The resultant panel, when applied using the NoiseStop System Soundproofing method, is equivalent to an traditional acoustic infill of 100 mm thickness. The NoiseStop System method statement must be adhered to in its entirety to achieve the best sound proofing results

Accredited tests have shown a reduction of 49db.

The panels should be skimmed and then brought to required decorative

DFM 50 (140kg/m3)

DFM products are manufactured to a higher density than other mineral wool slabs and provide improved Soundproofing acoustic control across a wide range of frequencies. Effective sound proofing insulation is an essential requirement for modern life styles. Excessive noise maybe from noisy neighbours can increase stress, hinder speech and can cause its own form of environmental pollution.

DFM has been proven over many years to be the ideal Soundproofing insulation material for all applications where noise attenuation or noise absorption is needed - in Soundproofing in the home / domestic, commercial, manufacturing, industrial and environmental situations. In addition to its acoustic properties, its well known thermal insulation and fire protection performance are inherent benefits. Thickness' of 25, 50, 75, 100 and 200mm are available. Prices vary accordingly. The most commonly used is the 50mm when applied inside 2"x2" stud work in wall partition constructions.

SoundBreaker Bars

Can help to reduce transmission of sound between floors and ceilings when using traditional plasterboard ceilings. Also helpful when needing to separate NoiseStop Soundproofing panels from wall structures. The bars are available in 3m lengths, 70mm wide by 15mm deep.