NSSC2 Ceiling Board - The Sound Solution, York, UK

28mm soundproofing board reducing airborne noise through existing an ceiling structure

Ceiling soundproofing board can be applied over an existing ceiling or as part of a new ceiling system. The NSSCC2  boards are ideal for over boarding a ceiling to reduce airborne noise. If ceilings can not be removed and the ceiling height can not be lowered significantly to install a full ceiling system these boards can be used to reduce airborne noise.

Product Specification

The boards consist of two layers of 12.5mm acoustic plasterboard which are bonded to a layer of high density rubber. The NSSC2 boards have a 2.5mm layer of rubber. The boards are bonded together using a polyurethane adhesive.

DATA SHEET

Installation

These boards can be installed below existing ceilings or as part of a new independent ceiling system. Boards can be screwed through existing ceilings into ceiling joists, for a better level of sound reduction the boards should be hung from Soundbreaker bars. If you are installing a new soundproof ceiling system these boards will increase the level of airborne sound reduction through the ceiling compared to standard acoustic plasterboard.

boards should be screwed to joists or Soundbreaker Bars not nailed. We recommend a mimmum of 16 dry wall screws per board. Once the boards are in place you should ensure that they are sealed with an acoustic sealant around the edges. The boards can be plastered and brought up to a decorative finish.

Enjoy peace and quiet with The Sound Solution.