Soundproofing ceiling panel, overboard an existing ceiling reduce airborne noise through your ceilings.
Improve the sound insulation of your ceilings; reduce the noise generated by TVs and conversation by installing the NSSC2+ panel onto your ceilings. Soundproof a flat or reduce sound transfer in your own home through separating floors by using the NSSC2+ panel, if you cannot remove your existing ceilings, and don't want to lose significant ceiling height this ceiling panel is the ideal solution. The high density mass loaded vinyl at the centre of these panels reduces vibration across the plasterboard, which helps to reduce sound transmission into the room. Soundproof ceilings that have existing timber joists.
We manufacture all our wall and ceiling panels and supply direct to trade
and public customers, keeping down costs which we can than pass on to our
customers. Our technical team are ready to help with your enquiries call 08451 306269 for help and advice on
products, installation and quotations Mon-Fri 8.30am-5.00pm.
The NSSC2+ panel should be screwed into ceiling joists using dry wall screws, you can either fix through an existing ceiling or fix directly to the joist if the ceiling has been removed. Install soundbreaker bars to your ceiling and then hang the ceiling panels from the bars for an increase in soundproofing performance of between 4-6dB. Soundbreaker bars should be spaced at 300-350mm centres. Acoustically seal the edges of the boards with acoustic sealant. Panels can be cut with a hand saw or jigsaw to fit any shape.