36mm floating floor to upgrade timber floors laid directly onto joists or overboard an existing floor to comply with Part E
Noisedeck 36 is designed to reduce sound transmission
through existing applications. It consists of 18mm moisture resistant chipboard
bonded to a triple layer acoustic composite. Install as a floating floor which
must not be nailed or screwed to the floor or joists.
Product Specification
Noisedeck
36 combines 22mm moisture resistant chipboard bonded to a layer of 14mm
acoustic layer. Acoustic layer consists of two layers of high grade foam either
side of a 5mm layer of high density rubber.
|
Product
Specification
|
Noisedeck 36
|
|
Dimensions
|
2400mm x
600mm
|
|
Thickness
|
36mm
|
|
Weight
|
32kg
|
|
Area Coverage
|
1.44m²
|
Acoustic Performance
|
Noise Reduction
|
Noisedeck 32
|
|
Airborne Sound Insulation Timber Floors
Building regs requires
<43dB
|
47dB
|
|
Impact Sound Insulation Timber Floors
Building regs requires
>64dB
|
55dB
|
Installation Guide
DATA SHEET
Installation
Noisedeck boards should be installed as a
floating floor, they should not be screwed or nailed to joists as this
can result in sound transmission through the fixings. Lay over an
existing floor or directly to the joists in a brick bond pattern.
Before
the boards are laid an isolating tape should be stuck around the edge
of the room where the flooring will meet the walls. Isolating the floor
from the walls will reduce sound transfer along the floor and into the
walls, reducing the possibility of flanking noise.
The
boards have a tongue and groove edge on four sides which will
interlock. Ensure each edge has wood glue applied to it before locking
them together. Wipe away any excess glue as you go.
Once the
boards are installed you are now ready to lay your final floor finish.
If you are installing this flooring in a new build or conversion you
should have the sound test done before the final floor finishes are
installed. This could save time and money having to remove them so the
floor can be tested.
Enjoy peace and quiet with The Sound Solution.
