HOME - The Sound Solution
Contact us
Soundproofing Installations

Search

Shopping Cart:  Items: 0 | Total: £0.00



Noisedeck 32 Floating Floor


Price:  £51.53


NoiseDeck 32

32mm floating floor reduce sound transmission through a timber floor to comply with Part E

Noisedeck 32 is designed to reduce sound transmission through existing applications. It consists of 18mm moisture resistant chipboard bonded to a 14mm triple layered acoustic composite. Install as a floating floor which must not be nailed or screwed to the floor or joists. Floating floors will increase the noise reduction of separating floors to meet Part E as well as offering high levels of sound insulation in music rooms and home cinemsa.

 Product Specification  

Noisedeck 32 combines 18mm moisture resistant chipboard bonded to a layer of 14mm acoustic foam and rubber. The acoustic layer consists of two layers of high grade foam either side of a 5mm layer of high density rubber.

  • Dimensions 2400mm x 600mm
  • Thickness 32mm
  • Weight 28kg
  • Area Coverage 1.44m² 

Acoustic Performance

  • Airborne sound insulation 46dB
  • Regs require <43dB
  • Impact sound insulation 56dB
  • Regs require >64dB

Installation

Noisedeck boards should be installed as a floating floor, they should not be screwed or nailed to joists as this can result in sound transmission through the fixings. Lay over an existing floor or directly to the joists in a brick bond pattern. Before the boards are laid an isolating tape should be stuck around the edge of the room where the flooring will meet the walls. Isolating the floor from the walls will reduce sound transfer along the floor and into the walls, reducing the possibility of flanking noise. The boards have a tongue and groove edge on four sides which will interlock. Ensure each edge has wood glue applied to it before locking them together. Wipe away any excess glue as you go.Once the boards are installed you are now ready to lay your final floor finish. If you are installing this flooring in a new build or conversion you should have the sound test done before the final floor finishes are installed. This could save time and money having to remove them so the floor can be tested.

Due to the size of these boards a minimum order quantity applies, if you require less than the minimum order please call us to arrange delivery.



Qty



Min: 10
 




We Also Recommend :



Customers who bought this product also purchased...

50mm DFM Acoustic Insulation
£3.57  £3.03
Save: 15%
100mm DFM Acoustic Insulation
£6.59  £6.17
Save: 6%

Copyright © 1994-2017 The Sound Solution