HOME - The Sound Solution
Contact us
Soundproofing Installations

Search

Shopping Cart:  Items: 0 | Total: £0.00



NSSF7 Floor System 10mm


Price:  £36.63


NSSF7 10mm floor soundproofing acoustic underlay used underneath carpet to increase the sound insulation between floors, reduce impact and airborne noise.

The NSSF7 is a 10mm acoustic underlay mat used in homes, offices and public buildings that require additional sound insulation against impact and airborne noise. Combine with DFM acoustic insulation for excellent levels of airborne soundproofing. Lay the NSSF7 over wooden or concrete flooring, predominantly used below a carpeted floor finish, carpets can be laid directly over the NSSF7, if you are combining the product with a carpet underlay the perimeter strips should be used around the edge of the room. Gripper rods are attached onto the strips to raise them up to the correct height of the carpet. Underlay can be laid over the top of the NSSF7. Homeowners or carpet fitters would be able to install this product into homes or businesses for increased sound insulation against footfall and conversation sound coming through separating floors.

NSSF7 is simple to install into any room, supplied in 1200mm x 1200mm sheets it is easy to store and handle. The mat should be laid over the floor in a brick pattern, if you are working to Part E Building Regulations the NSSF7 should be bonded to the floor using a suitable adhesive. Cut the NSSF7 with a sharp knife or a pair of heavy duty scissors to fit any shape.

If you have a new build or conversion project that has failed a pre-completion sound test the NSSF7 can be used as a remedial treatment for the floor to increase the sound insulation of the separating floor.

This product is normally supplied from stock and can be delivered quickly if necessary, if you have any questions contact us or give us a call on 08451 306269 8.30-5.00 Mon-Fri.

Fitting

NSSF7 should be laid in a brick bonded formation over the floor, the materials should be laid inside the gripper rods. If you are combining the NSSF7 with carpet underlay you should use perimtere edging strips below the grippers to raise them to the correct floor height. The NSSF7 can be cut with a sharp knife to fit around any shape.

Product Information

  • Dimensions 1200mm x 1200mm
  • Thickness 10mm
  • Weight 15kg
  • Airborne sound insulation 43dB
  • Impact sound insulation 62dB
  • Two layers of 2.5mm mass loaded vinyl and a 5mm layer of acoustic foam

Delivery informationProduct information



Qty




 




We Also Recommend :



Customers who bought this product also purchased...

NoiseStop acoustic ceiling panel
£47.69  £42.92
Save: 10%
Noisestop acoustic wall panel
£47.69  £42.92
Save: 10%
NSSC2+ Ceiling Board 30mm
£44.46  £39.12
Save: 12%

Copyright © 1994-2017 The Sound Solution