Batten Systems: Regupol SoundBatten (Concrete)
NoiseStop Systems UK Site: Soundproofing for Domestic, Commercial and Industrial. Call Today on 08451 306 269.
This Months Deal!
FREE Delivery and Special Offers Now on Most Purchases (Excluding Vat).*
Extra Discount on Selected Products & Materials | Trade Discount | Call and ask for more Detail.*
|
| The BEST things in life are FREE! |
 |
Quotation Service |
|
Valuation Service |
|
Advice |
|
 |
What can I help you with?
- Do you need a brochure?
- Is it a quote you're after?
- Can I help you with a technical question?
- Do you need a sample?
|
|
| Below
you will find information on specific products within our range.
To
ensure that you purchase the correct products to suit your requirements
we recommend that, you contact
one of our qualified customer focused advisors, who will be only too pleased to help. Please call 08451
306 269 or email
us for a quote
or advice. |
Regupol Sound Batten is a resilient composite batten floor system for use with Robust Detail floor construction types MF1 (E-FC-1), MF8 (E-FC-2) and SF2 (E-FS :1). There are two types - type FFT1 resilient composite deep batten and type FFT3 resilient composite standard batten.
Regupol Sound Batten has been tested and is certified to provide the necessary acoustic insulation required for compliance with Part 'E' of the building regulations for these RD floor types.Regupol Sound Batten battens comprise a resilient layer pre-bonded to standard (50mm x 50mm nominal) battens or deep (50mm x 70mm nominal) battens.
|
 |
Approved as Doc E compliant for conversion and new build standards
pproved for robust standard detail FFT1 (70mm min deep battens) and FFT3 (50mm min standard battens) Ideal for precast and beam & block floors.
|
| Type FFT1 |
Type FFT3 |
| Length |
1800mm 1800mm |
| Batten cross section |
50 x 70mm 50 x 50mm |
| Resilient layer thickness |
15mm 15mm |
| RD compliance requirement |
17dB 17dB |
| Sound Batten rating dB |
33dB 29dB |
| Measured in accordance with |
BS EN ISO 140-8:1998 |
|
Regupol Sound Deck Flanking Band must be used around the perimeter of floors laid with Regupol Sound Batten to ensure compliance.
|
- Fill all voids between walls and floor
- Ensure that the concrete floor is level and clean.
- Lay Regupol Sound Batten battens at spacings recommended by the flooring board manufacturer.
- Ensure that the ends of the battens do not come into direct contact with walls.
- Ensure that any services do not bridge the resilient layer.
- Lay flooring board and butt panels tightly together.
Install Regupol SoundDeck Flanking Band around the perimeter of the flooring board to isolate floor from walls and skirtings. |
 
 
|
|
|
