| The BEST things in life are FREE! |
 |
Quotation Service |
|
Valuation Service |
|
Advice |
|
 |
What can I help you with?
- Do you need a brochure?
- Is it a quote you're after?
- Can I help you with a technical question?
- Do you need a sample?
|
 |
| Below
you will find information on specific products within our range.
To
ensure that you purchase the correct products to suit your requirements
we recommend that, you contact
one of our qualified customer focused advisors, who will be only too pleased to help. Please call 08451
306 269 or email
us for a quote
or advice. |
|
Regupol 4515 Eco is a general purpose acoustic underlayment manufactured
from a combination of cork granules and rubber crumb.
Other items required with this product:
Regupol Approved Adhesive
High Tack Tape
| Units |
Quantity (m2) |
| 1-36 |
1-500 |
| 36-145 |
500-2000 |
| 146+ |
2000+ |
Supplied in roll sizes:
12m x 1m x 4.5mm (1 full roll - 13.8m2) (28 Rolls per Pallet)
| Units |
Quantity (m2) |
| 1-25 |
1-500 |
| 25-110 |
500-2000 |
| 101+ |
2000+ |
Supplied in roll sizes:
20m x 1m x 3mm (1 full roll - 23m2) (28 Rolls per Pallet)
|
Regupol 4515 Eco conforms to the following specifications:
| Density |
approx 470 kg/m3 |
| Tensile strength (DIN 53571) |
approx 0.45 N/mm² (3mm thick) |
| Elongation at break (DIN 53571) |
approx 18% |
| Temperature resistance |
-40 to +110°C |
| Thermal Conductivity |
approx 0.12 W/mk |
| Thermal resistance (DIN 52612) |
3mm 1/symbol = 0.025 K/W |
|
5mm 1/l = 0.041 K/W |
| Impact sound insulation ΔLw |
17dB (measured in accordance with BS EN ISO 140-8:1998) |
|
- Has been independently tested by a UKAS accredited laboratory to show compliance with the new building regulations in accordance with Approved Document E 2003.
- Standard thickness 5mm thick, although other thicknesses are available upon request.
- Offers Long Term performance without collapse or “bottoming” out under high point loads
- Resistant to ageing and deformation
- Quick and easy to install. Simply bond to the subfloor beneath the final floor finish
- Reduces construction heights
- Suitable for both build projects
- High quality and exact material thickness guaranteed
- Suitable for use with under floor heating
- Very comfortable under foot
|
|
Before you lay Regupol Eco
- Subfloor preparation is essential for the correct installation of Regupol Eco. Subfloors must be sound, dry and free from any contaminants which could affect adhesion.
- Please ensure that the Regupol Eco is unrolled and left in the area to which it is to be applied a few hours prior to installing as the product stretches. Slightly stretches slightly when rolled up due to winding tensions.
Laying Regupol Eco
- Bond Regupol Eco to the subfloor using a suitable adhesive (please contact CMS Acoustics for a list of recommended), taking care to find follow the manufacturer’s instructions.
- Lay the Regupol Eco into the adhesive and press from the centre outside to exclude to exclude to exclude air and ensure contact with adhesive.
- Roll the Regupol Eco with a 68kg flooring roller, from end to end and side to side to ensure overall contact.
- Use a craft knife and straight edge for cutting to size and please ensure that all edges are butt jointed.
- After 30 minutes, when the floor has been completely covered, roll once again to ensure contact is maintained.
- Please do not apply loads or move furniture on the Regupol Eco until the adhesive has fully set.
|
- The recognized technical rules of the industry, and the code of practice requirements of BS8303:2001 “Installation of Resilient Floor Coverings” are to observed.
- Regupol Acoustic Underlayments can be easily installed providing BS8303:2001 and our installation guidelines are observed
|
|
