| The BEST things in life are FREE! |
 |
Quotation Service |
|
Valuation Service |
|
Advice |
|
 |
What can I help you with?
- Do you need a brochure?
- Is it a quote you're after?
- Can I help you with a technical question?
- Do you need a sample?
|
 |
| Below
you will find information on specific products within our range.
To
ensure that you purchase the correct products to suit your requirements
we recommend that, you contact
one of our qualified customer focused advisors, who will be only too pleased to help. Please call 08451
306 269 or email
us for a quote
or advice. |
Regupol 6010XHT Acoustic Isolating Strips are designed to sit beneath blockwork walls and a very simple way to reduce structure borne noise. It is designed to isolate noise and vibrations at source.
|
|
| 1.25m x 50mm x 6mm |
| 1.25m x 75mm x 6mm |
| 1.25m x 100mm x 6mm |
| 1.25m x 150mm x 6mm |
| 1.25m x 225mm x 6mm |
| 1.25m x 300mm x 6mm |
|
- Standard thickness 6mm, although other thicknesses are available upon request.
- Offers long term performance without collapse or "bottoming" out under high print loads.
- Capable of withstanding loads up to and including 0.8N/mm2, with low frequency performance achieved.
- Completely recyclable and can therefore compliment companies' "environmental policies"
- Resistant to ageing and deformation.
- Quick and easy to install - simply bond to the subfloor beneath the blockwork.
- Minimises construction heights .
- High quality and exact material thickness guaranteed.
|
* It is the sole responsibility of the installer as to whether the Regupol isolating strip is bonded in-situ or loose laid.
|
|
Before you start installation
Prepare the Base Floor. It is important that the base floor is dry, clean (free of dirt and concrete dust) and flat.
Installing the Regupol Isolating Strip
The Regupol 6010XHT Isolating Strip can either be bonded to the base floor or loose laid (if bonding contact us for a list of recommended adhesives). Bonding should be carried out in accordance with the adhesive manufacturer's instructions. Ensure that a sufficient width of Regupol 6010XHT Isolating Strip is used for the partition and cladding. Any surplus material should be trimmed with a builder's knife.
NB
- Regupol 6010XHT has a maximum load bearing capacity of 0.8N/mm2, therefore this must be taken into consideration when calculating the linear loads.
- The recognized technical rules of the industry, and the code of practice requirements of BS8203:2001 "Installation of Resilient Floor Coverings are to be observed.
- Regupol Acoustic Underlayments can be easily installed providing BS 8203:2001 installation guidelines are observed.
|
|
