| The BEST things in life are FREE! |
 |
Quotation Service |
|
Valuation Service |
|
Advice |
|
 |
What can I help you with?
- Do you need a brochure?
- Is it a quote you're after?
- Can I help you with a technical question?
- Do you need a sample?
|
 |
| Below
you will find information on specific products within our range.
To
ensure that you purchase the correct products to suit your requirements
we recommend that, you contact
one of our qualified customer focused advisors, who will be only too pleased to help. Please call 08451
306 269 or email
us for a quote
or advice. |
Regupol Kushin Pad is a combination of two BSW products:
Sub Layer - a 15mm layer of Regupol 6010SH, an elastic premanufactured mat made from selected tyre crumb rubber bound with polyurethane.
Top surface - layer a 10mm of Regupol Everline, an elastic floor covering containing rubber granules bound by means of polyurethane. |
|
Regupol Kushin Pad is primarily used as an impact insulation material for loading bays in retail premises, mail distribution facilities, etc. Regupol Kushin Pads are designed to greatly reduce the noise transmitted from vehicle tailgates and steel trolleys coming into direct contact with concrete/steel loading bays.
The Regupol Kushin Pad surface finish is suitable for pallet truck traffic and wheeled cages. Additional applications include gymnasium floors and fitness centres to reduce the transmission of impact sound to lower floors and can also be used as a very hard wearing floor finish for the walkways of ice/skating rinks. |
- Available in easy to handle sheets, simplifying installation.
- Easy to install.
- Highly durable finish.
- Indentation resistant.
|
The products is made up of two materials,Regupol 6010SH and Regupol Everline laminated together. The characteristics of Regupol Kushin Pad are as follows:
| Elongation at break (DIN 53577) |
Approx 70% |
| Tear Resistance (DIN 53515) |
16.5 N/mm |
| Fire Resistance (DIN 4102) |
B" normal inflammable |
|
Regupol Kushin Pad is a high performance material that has been tested by National Design Consultancy (Test report reference 80050 dated 3/3/1999) with the following test results:
Impact Sound Insulation /\Lw - 24dB (measured in accordance with BS EN ISO 140-8:1988)*
*Building Regulations Approved Document E 2003 requirements - Minimum 17dB. Independent Test Certificate available on request. |
|
