***CLICK HERE FOR SPECIAL OFFER***
| Acoustic underlay for any floor type will increase sound insulation and
reduce impact noise. |
- Reduces aiborne and impact noise.
- Easy to install
- Suitable for all floor types and finishes
- Reduces construction height
Sheet size
| 1200mm x 1200mm
|
Thickness
| 10mm
|
dB reduction airborne noise
| 48dB
|
dB reduction impact noise
| 45dB
|
Covers area
| 1.44sqm
|
InstallationEach sheet comes in 1.2metre square sheets making them easy to handle, store
and fit.
NSSF7 needs to be installed compactly with
no gaps between sheets and the joins staggered. You can either bond them
to the floor or lay them loose. The edges can be tightly pushed into
the edges of the room as sound does not vibrate along the sheets.
Carpets- if carpet grippers are required we would recommend the use of the perimetre strips around the edge of the room to ensure the finished floor height is the same. Fix the strips around the edge of the room then lay the NSSF7 product inside the perimetre strips. Attach carpet gripper rods to the strips and then lay the carpet as normal.
Laminate or wooden floors- We recommend that a 9mm layer of ply wood or equivalent be bonded on top of the NSSF7 before laying these floor finishes. This should be checked with the installer of the flooring materials.
NSSF7 is an acoustic flooring underlay which is used mainly on timber floors to reduce the problem of airborne and impact noise. Its ease of installation makes it the ideal product for use under carpet, as a replacement or supplement to traditional carpet underlay. NSSF7 is ideal for those undertaking conversions as it conforms to building regulations (Approved Document E) offering improved levels of impact and airborne sound insulation, when used on an existing floor.
NSSF7 consists of triple laminate, rubber barrier
shield (2 layers) and LRAC foam. The sheet sizes are 1200mm x 1200mm x 10mm.
Weight per sheet is 18kg. This gives the ability to offer airborne and impact reduction for only an approx 10mm thickness. Ideal for multi-use on all surfaces, NSSF7 is widely used as a very high quality sound reduction underlay.
| NSSF7 10mm |
£28.45 +VAT |
1200mm x 1200mm |
1.44m2 |
