Acoustic underlay for timber and concrete floors, will increase sound
insulation and reduce impact noise.
|
- Reduces airborne and impact noise
- Easy to install
- Complies with Part E for all floor types
- reduces construction height
Sheet size
| 1200mm x 600mm
|
Thickness
| 15mm
|
dB reduction airborne noise
| 50dB
|
dB reduction impact noise
| 42dB
|
Covers area
| 0.72 sqm
|
Installation
Each sheet is 1200mm x 600mm so is easy to handle. Needs to be installed with no
gaps between the sheets and the joints staggered. You can bond them to
the floor or lay them loose. The edges can be tightly pushed into the
edges of the room as sound does not vibrate along the sheets.
Carpets- if carpet grippers are
required we would recommend the use of the perimetre strips around the
edge of the room to ensure the finished floor height is the same. Fix
the strips around the edge of the room then lay the NSSF7+ product inside
the perimetre strips. Attach carpet gripper rods to the strips and then
lay the carpet as normal.
Laminate
or wooden floors- We recommend that a 9mm layer of ply wood or
equivalent be bonded on top of the NSSF7+ before laying these floor
finishes. This should be checked with the installer of the flooring
materials.
NSSF7 Plus Acoustic flooring underlay is used on timber and concrete floors to reduce the problem of airborne and imopact noise. NSSF7 Plus can be laid underneath solid floor finishes such as laminate and tiled floors, it is recommended that a chipboard is laid over the material beore laying the floor fininsh, this is to reduce the risk of any movement of the floor. NSSF7 Plus offers higher levels of performance
compared to NSSF7 due to its extra thickness and higher grade of foam.
NSSF7 Plus can help to conform to Building Regulations (Approved Document E) offering improved levels of impact and airborne sound insulation, when used on an existing timber floor.
NSSF7 Plus consists of three layers made up of 2 layers of high grade foam that sandwich a layer of rubber barrier shield. The sheet sizes are 1200 x 600mm x 15mm. Weight per sheet is 12kg.
| NoiseStop F7 Plus 15mm |
£20.43 +VAT |
1200mm x 600mm x15mm
|
0.72 m² |
