Idenden 10-323 Multi-Purpose Aerosol Adhesive is a rapid-drying adhesive with a wide range of uses, including bonding foam, cork, felt and other lightweight materials to themselves or to wood, glass, metal and rigid plastics.  Idenden 10-323 is particularly suitable for bonding polythene or other plastic sheeting to itself or to masonry or metal substrates in the construction of temporary tenting.  Idenden 10-323 can also be used to bond foil facings or other finishing materials to insulation sections or slabs.

• Rapid drying – typically – 1-3 minutes
• Wide service temperature range
• Easy to use aerosol with variable nozzle
• Short dwell time when used in two-way stick mode

It is supplied in aerosol form with variable setting nozzles which is an economical and controllable method of application.

Idenden 10-323 consist of synthetic rubber together with resins and solvents.  The adhesive is a pale tan colour, and is clear in appearance when dry.

Directions for use

IMPORTANT: Before embarking on any work involving Idenden 10-323, the separate Safety Data Sheet should be studied by those carrying out the work.

• Ensure surfaces to be bonded are clean, dry and free from dust, oil and grease.
• Shake can well before use.
• Select appropriate spray pattern by turning the nozzle on the top of the can.
•  
• NON POROUS SUBSTRATES - Apply an even coat of Idenden 10-323 to both surfaces to ensure maximum bond.  Allow adhesive to become tacky ( between 1-3 minutes) then press surfaces together.