Dense Fibre Matting Product Description

An acoustic rock mineral wool slab bonded with a high performance binder, suitable for use in many applications including floors, walls, ceilings, roofs and many others.

Dense Fibre Matting (DFM) products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies.

Effective sound Insulation is essential requirement for modern life styles.  Excessive noise can increase stress, hinder speech and can cause its own form of environmental pollution.

DFM has been proven over many years to be the ideal insulation material for all applications where noise attenuation or noise absorption is needed; in domestic, commercial, manufacturing, industrial and environment situations. In addition to its acoustic properties, its well known thermal insulation and fire protection performance are inherent benefits.

This product is ideal for use as a stand alone infill in stud framework of walls, floor joists and occasionally suspended ceilings.  Its main purpose is to reduce airborne noise.

These slabs should not be confused with thermal insulation which comes in roll form.  Typical thermal insulation will only have a density of approximately 15kg/m3.  We supply and recommend the slab form only, which can vary in density, but starts at a minimum of 100kg/m3.  This density is the key to the superior reduction which the acoustic mineral wool provides over the thermal ‘roll’ insulation.

1. Dense Fibre Matting Product Description
2. Dense Fibre Matting Product Specification
3. Dense Fibre Matting Product Installation
4. Dense Fibre Matting Ceilings Systems
5. Dense Fibre Matting Buy Online Now

Back to top

<< Back to Sound Proofing Ceilings