The BEST things in life are FREE!
- FREE Quotation Service
- FREE Valuation Service
- FREE Advice
|
|
What can I help you with? |
| Do you need a brochure? |
| Is it a free quote you're after? |
| Can I help you with a technical question? |
| Do you need a sample of a product? |
 |
| NoiseStop Systems NoiseDeck 36 |
|
 NoiseStop Systems NoiseDeck 36 is designed to reduce sound transmission through existing applications.
NoiseStop Systems NoiseDeck 36 consists of 22mm moisture resistant chipboard bonded to a triple layer acoustic composite.
When installed as part of a complete sound reduction system it enables a timber floor to meet the sound transmission regulations of Part E (see table).
NoiseStop Systems NoiseDeck 36 sound transmission performance
[performance figures are currently estimated as trials continue] |
|
DnT,w + Ctr |
L'nT,w |
| Treated floor |
53dB |
53dB |
| NoiseStop Systems NoiseDeck 36 Product Data |
| Overall board dimensions |
2400mm x 600mm x 36mm thick |
| Resilient layer |
15mm |
| Resilient layer composition |
Acoustic Foam / High Mass Polymer / Acoustic Foam |
Specification
The acoustic insulation shall be:
| Specification |
| NoiseStop Systems NoiseDeck 36 on 225 x 50mm timber joists at 400mm centres packed with 100mm of 10kg-45kg/m³ insulation with a 25mm double boarded ceiling |
The above system utilises the ability to leave the current double boarded ceiling in. All work would be undertaken from above. No other flooring products would be required as the NoiseDeck 36 would be applied directly on to the joists.
Installation
- Fix NoiseStop Isolation Tape, for acoustic flanking resistance, at the floor perimeter.
- Lay NoiseStop Systems NoiseDeck 36 over floor joists, in staggered broken bond pattern, generously applying adhesive to all tongued and grooved panel joints.
- Install skirting.
Materials Required
NoiseStop NoiseDeck 36
NoiseStop Isolation Tape
DFM100 (45kg/m2)
General Notes
If you require information on any of our products please visit our website on www.noisestopsystems.co.uk, where a full specification sheet can be downloaded.
If you feel this system is not what you require then please contact us on 0845 1 30 62 69 to discuss this further. We can supply a wide range of systems and products to suit most needs.
Please note the purchase of any materials from NoiseStop Systems is subject to our standard terms and conditions. All quantities stated should be used as a guide and we recommend you confirm the required quantities before ordering. |
|
