Triple Laminate Rubber Barrier Shield – NSSF7

Ease of Use · Reduces Impact and Airborne noise · Cut to any shape
No damage to existing floor · Fits directly under carpet · Only 10mm thick

Installation

Each sheet comes in 1.2m square sheets making them easy to handle, store and fit.  NSSF7 needs to be installed compactly with no gaps between sheets and the joins staggered.  You can either adhere them to the floor or lay them loose.  The edges can be tightly pushed into the edges of the room as sound does not vibrate along the sheets.

There are two methods of installation when using NSSF7.  Method 1 with adhesive and method two without adhesive and using carpet grippers.

Method 1 - Adhesive

Clean and secure all floorboards, this is essential for achieving the best results.  The NSSF7 membrane can be bonded to most hardwoods and carpets.  When using this method, the NSSF7 needs to be bonded to the floor before it is bonded to the carpet.

Method 2 - Carpet grippers

A 20mm perimeter strip needs to be purchased and applied to the perimeter of the room, this allows the gripper to be flush with the surface of the NSSF7.  To apply the strip use an adhesive on the rear and lay into place.  This creates an anti vibration layer in which the carpet gripper can be nailed to.  If the gripper is to in contact with the skirting board, then we recommend applying a flexible mastic bead in between the two surfaces to reduce any transmission of sound.

If the height needs to be adjusted we recommend doubling up on the layers of perimeter strip used.

1. Noise Stop F7 Product Description
2. Noise Stop F7 Product Specification
3. Noise Stop F7 Product Installation
4. Noise Stop F7 Floors Systems
5. Noise Stop F7 Buy Online Now

Back to top

<<Back to Sound Proofing Floors