Tel : 08451 306 269
email: info@noisestopsystems.co.uk
Floor Soundproofing: Vibration Damping Compound System
Extra Discount on Selected Products & Materials | Trade Discount | Call and ask for more Detail.*
Polyfoam Floor Foam - FREE PCT (Pre Completion Test) with every order over 100 L.M
Grand Designs Live - As Seen Tried & Tested - Extreme Hut Test
- Do you need a brochure?
- Is it a quote you're after?
- Can I help you with a technical question?
- Do you need a sample?
Soundproofing Floors: Vibration Damping Compound System
Vibration Damping Compound is a water based co-polymer emulsion, with mineral fillers and a low permeable, elastomeric binder. It is solvent free, easy to apply and can be used in most interior and semi-exposed areas. It is designed to reduce noise by damping resonant vibration caused by continuous or impulsive excitation of the substrate to which it is applied.
Vibration Damping Compound can be sprayed onto smooth and irregular surfaces. Once applied, it has a monolithic spray texture finish.
Colour - Buff
Application
Vibration Damping Compound is deigned for use in areas where a continuous membrane is required to damp noise and vibration from steel, aluminium and other non ferrous metals. It is used extensively on large surface areas e.g., floors and body-sides of railway carriages, air conditioning equipment and contoured metal surfaces.
Surface and Air Temperature
Vibration Damping Compound is suitable for use on substrates when the air and surface temperature is rising between 2°C and 45°C. Air and surface temperature should also be at least 2°C above dewpoint.
Fire Performance
Vibration Damping Compound complies with the Class 'O' requirements of the Building Regulations, when tested to BS476: Part 6: 1981 and Part 7: 1987.
Acoustic Performance
At 22°C, Vibration Damping Compound has a Damping Coefficient Decay Rate of 25dB/sec at 3.1kg/mē, when tested to BS, AU 125: 1966.
Dimensions and Density
Coverage
On flat surfaces, 1.5 litres of wet compound will cover approximately 1m² at 1mm thick.
Chemical Resistance
After 10 days total immersion in the following chemicals, Vibration Damping Compound was found to be resistant to: 10% solutions of Hydrochloric, Nitric and Sulphuric acid, 10% solutions of Sodium Hydroxide and Potassium Hydroxide, Xylene and Acetone. Vibration Damping Compound is mildly alkaline at approximately pH9.
Storage
Vibration Damping Compound should be protected from frost and excessive heat. Avoid exposure to radiant sunlight. Store at temperatures between 4°C and 45°C. Use within 6 months of purchase.
- Vibration Damping Compound Description
- Vibration Damping Compound Specification
- Vibration Damping Compound Installation
- Vibration Damping Compound System