Floor Soundproofing Solutions

Soundproofing Floors Solutions - Suitable for Domestic or Business Application

Noise Stop Systems - Sound Proofing Floors Solution Options

One of the most annoying problems you may experience in your home is impact noise on the floor above and airborne noise transmission from below. This problem arises when adequate sound insulation has not been installed between the floor cavities or sound damping material is not laid on top of your timber and concrete floor.

Noise nuisance problems arise from loud noises such as television sound, stereo music, shouting, kids playing, dogs barking, baby crying, couples arguing, impact noise on the floor above, musical instrument practice and running footstep on the stairs. We have several products that can be used in soundproofing floor applications. Our NSSF7, NSSF7 Plus and NoiseStop Isolation Mat products are well suited to acoustic flooring underlay. The NoiseDeck and Monarfloor are designed to reduce sound transmission through existing concrete or timber floor. Dense Fibre Mat is used to fill the cavity between existing or constructed floor joist. NoiseSonic E is used as sound control matting beneath ceramic tiles, marble, wood vinyl or carpet flooring in both wood frame and concrete slab constructions.

If you need any help please call 08451 306 269 and one of our Technical Staff will be happy to help you.

NoiseStop Systems NoiseDeck 36 is designed to reduce sound transmission through existing applications.

NoiseStop Systems NoiseDeck 36 consists of 22mm moisture resistant chipboard bonded to a triple layer acoustic composite.

Installation

• Fix NoiseStop Isolation Tape, for acoustic flanking resistance, at the floor perimeter.

• Lay NoiseStop Systems NoiseDeck 36 over floor joists, in staggered broken bond pattern, generously applying adhesive to all tongued and grooved panel joints.

• Install skirting.

Dense Fibre Matting (DFM) products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies.

DFM has been proven over many years to be the ideal insulation material for all applications where noise attenuation or noise absorption is needed; in domestic, commercial, manufacturing, industrial and environment situations.

This product is ideal for use as a stand alone infill in stud framework of walls, floor joists and occasionally suspended ceilings.  Its main purpose is to reduce airborne noise.

A self adhesive isolation tape for use in all areas to create separation between solid mass.

Available in 20mm or 30mm widths, 5mm thick and 12 metres in length. This isolation tape can be used around the edges of the room to separate acoustic floors from walls. Under partitions to reduce sound transmission. Or even on joists beneath structural floors. Your uses are endless!

Ideal for use with many Soundproofing products at a very low cost.

NSSF7 is an acoustic composite comprising of a layer of non flammable foam sandwiched between two layered sheets of sound deadening damping barrier membrane. This gives the ability to offer huge airborne and impact reduction for only an approx. 10 mm thickness. Ideal for multi-use on all surfaces, NSSF7 is widely used as a very high quality sound reduction underlay.

Fire Rating

BS476 part 6 index 1 10.3 sub index 1 5.3
BS476 part 7 class 1
Building regulations 1976 section E15: class "O"