Soundproofing Materials

Soundproofing Materials - Suitable for Domestic or Business Application

Noise Stop Systems - Sound Proofing Ceilings Solution

Soundproofing Materials:

We have a wide range of soundproofing materials to solve any noise problems that you might be suffering from. Our soundproofing materials and products are of the highest standard offering great sound reduction and noise eradication.

All of our soundproofing materials will help you to meet new Part E Building Regulations. Our products continue to meet and exceed most newly implemented building regulations.

This is achieved by using a combination of our acoustic products. We have put together some soundproofing options below that will meet most of your soundproofing needs.

SoundBreaker Bars are designed to reduce both airborne and impact noise transfer between adjacent rooms by decoupling an existing wall or ceiling from a secondary wall or ceiling.

Application:

SoundBreaker Bars are used extensively on party walls and ceilings of meeting rooms, offices, conference facilities, interview rooms, classrooms, theatres, cinemas, studios, surgeries, clinics, hotels, gymnasiums, dance studios and bedrooms.

Dense Fibre Matting (DFM) products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies.

DFM has been proven over many years to be the ideal insulation material for all applications where noise attenuation or noise absorption is needed; in domestic, commercial, manufacturing, industrial and environment situations.

This product is ideal for use as a stand alone infill in stud framework of walls, floor joists and occasionally suspended ceilings.  Its main purpose is to reduce airborne noise.

Accredited tests have shown a reduction of 37db.
The panels should be skimmed and then brought to required decorative order.

BENEFITS:
• Permanently flexible/high grab
• Adheres to most surfaces.
• Mould resistant.
• Non flammable
• Overpaintable.
• Easy clean up

AREAS FOR USE:
• To form an acoustic barrier by sealing gaps between plasterboard walls, floors and ceilings and in dry lining applications.
• As an adhesive to bond plasterboard to plasterboard, wood and metal studding and direct to blockwork.
• For sealing and bonding most other Kraft lined insulation boards.

NoiseStop Systems NoiseDeck 36 is designed to reduce sound transmission through existing applications.

NoiseStop Systems NoiseDeck 36 consists of 22mm moisture resistant chipboard bonded to a triple layer acoustic composite.

Installation

• Fix NoiseStop Isolation Tape, for acoustic flanking resistance, at the floor perimeter.

• Lay NoiseStop Systems NoiseDeck 36 over floor joists, in staggered broken bond pattern, generously applying adhesive to all tongued and grooved panel joints.

• Install skirting.

Dense Fibre Matting (DFM) products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies.

DFM has been proven over many years to be the ideal insulation material for all applications where noise attenuation or noise absorption is needed; in domestic, commercial, manufacturing, industrial and environment situations.

This product is ideal for use as a stand alone infill in stud framework of walls, floor joists and occasionally suspended ceilings.  Its main purpose is to reduce airborne noise.

A self adhesive isolation tape for use in all areas to create separation between solid mass.

Available in 20mm or 30mm widths, 5mm thick and 12 metres in length. This isolation tape can be used around the edges of the room to separate acoustic floors from walls. Under partitions to reduce sound transmission. Or even on joists beneath structural floors. Your uses are endless!

Ideal for use with many Soundproofing products at a very low cost.

NSSF7 is an acoustic composite comprising of a layer of non flammable foam sandwiched between two layered sheets of sound deadening damping barrier membrane. This gives the ability to offer huge airborne and impact reduction for only an approx. 10 mm thickness. Ideal for multi-use on all surfaces, NSSF7 is widely used as a very high quality sound reduction underlay.

Fire Rating

BS476 part 6 index 1 10.3 sub index 1 5.3
BS476 part 7 class 1
Building regulations 1976 section E15: class "O"

SoundBreaker Bars are designed to reduce both airborne and impact noise transfer between adjacent rooms by decoupling an existing wall or ceiling from a secondary wall or ceiling.

Application:

SoundBreaker Bars are used extensively on party walls and ceilings of meeting rooms, offices, conference facilities, interview rooms, classrooms, theatres, cinemas, studios, surgeries, clinics, hotels, gymnasiums, dance studios and bedrooms.

Dense Fibre Matting (DFM) products are manufactured to a higher density than other mineral wool slabs and provide improved acoustic control across a wide range of frequencies.

DFM has been proven over many years to be the ideal insulation material for all applications where noise attenuation or noise absorption is needed; in domestic, commercial, manufacturing, industrial and environment situations.

This product is ideal for use as a stand alone infill in stud framework of walls, floor joists and occasionally suspended ceilings.  Its main purpose is to reduce airborne noise.

This excellent new product is at the forefront of sound reduction technology. Its multi-use, versatility and cost effectiveness make it usable by all. Good as a stand alone product the barrier shield offers very good reduction values.

A high density mat, this flexible material can be used in any situation offering a sound reduction similar to that of a sheet of lead, except it is far superior in terms of versatility, availability, cost and handling.

Description

A compounded and processed mixture of thermoplastic organic polymers, phthalate esters, mineral fillers, stabilizers and pigmentation.