FREE Delivery and Special Offers Now on Most Purchases Excluding Vat).*
Extra Discount on Selected Products & Materials | Trade Discount | Call and ask for more Detail.*
Polyfoam Floor Foam - FREE PCT (Pre Completion Test) with every order over 100 L.M
Grand Designs Live - As Seen Tried & Tested - Extreme Hut Test

The BEST things in life are FREE!

Free

Quotation Service

Free

Valuation Service

Free

Advice

What can I help you with?

Do you need a brochure?
Is it a quote you're after?
Can I help you with a technical question?
Do you need a sample?

Buy Online

Soundproofing Walls: NSSW2 Installation

NSSW1 :: Description | Specification | Installation | System

NSSC1 and NSSC1 Plus Wall Board

NoiseStop Wall Application

Wall System 1 | Wall System 2

Installation

Wall System 1

We recommend this method of sound insulation for airborne noise, but it can also be used for impact noise solution.

Remove any skirting, coving, sockets and any other items on the wall.
A stud frame is then attached to the wall using either 25 or 50mm stud depending which system you are using
Place Dense Fibre Matting (DFM) into the stud frame. Cut to fit, making sure that there are no gaps.
If you have the sound breaker bars these are then screwed to the front of the stud work. The sound breaker bars already have predrilled holes for this.
Screw the wall board that you have, to the face of the soundbreaker bar, if you do not have the bars the board is screwed to the stud frame.
Seal any gaps that you may have with suitable filler.
Skim plaster to finish. Decorate to your requirement after.

If you have purchased NSSW1, NSSW1+, NSSW2 and NSSW2+ you can follow the above instructions. Technical help is available by calling 0845 130 6269

<< Back to Sound Proofing Walls