Thinnest wall soundproofing solution to stop noise passing
between rooms, increase the sound insulation of party walls and stud walls with the 28mm NSSW2 panel
The NSSW2 panel is our thinnest wall soundproofing solution;
at only 28mm it will reduce the amount of lost living space in the room while
increasing the sound insulation of most walls. If you are trying to keep as
much living space as possible apply the NSSW2 board directly to the surface of
the wall with a plasterboard adhesive, this will ensure space loss is reduced,
some systems require battens which can increase the depth of the soundproofing.
This type of direct to wall soundproofing is quick and easy
to install keeping disruption to a minimum. No additional plasterboard is
required, ensure all the edges are sealed with acoustic sealant, plaster skim
or decorate to complete the installation.
The combination of products that make up this panel block
and absorb sound as it tries to pass through the wall. Its high density blocks
the sound and the rubber core of the panel reduces sound vibrating through the
Direct to wall panels can be used to soundproof most wall constructions,
party walls, stud walls, home cinemas, music studios, home offices.
We manufacture all our wall and ceiling panels and supply
direct to trade and public customers, keeping down costs which we can than pass
on to our customers. Our technical team are ready to help with your enquiries
call 08451 306269 for help and advice on products,
installation and quotations Mon-Fri 8.30am-5.00pm.
The NSSW2 panel can be bonded to any wall surface, it is quick and easy to
install with a minimum amount of mess as part of a DIY soundproofing project.
Additional materials required for use with this board are plasterboard adhesive and acoustic sealant. The panels are bonded
directly onto the wall using the adhesive; acoustically seal the edges of the
boards with the acoustic sealant, full installation instructions are available.
Note: You will need one bag of adhesive and one 310ml tube of sealant
for every five boards.
- Dimensions 1200mm x 1200mm
- Thickness 28mm
- Weight 40kg
- Sound reduction 34dB
- Two layers acoustic plasterboard bonded to 2.5mm high density mass loaded vinyl
Delivery of this item will be made on a pallet.