Thin ceiling soundproofing panel to stop airborne noise passing between a floor through an existing ceiling.
If you don't like the thought of removing ceilings, or you just want to reduce domestic noise through your ceilings the NSSC2 panel can be fixed directly over your existing ceiling, reduce airborne noise transfer through the ceiling from TVs and talking. The high density mass loaded vinyl at the centre of these panels reduces vibration across the plasterboard, which helps to reduce sound transmission into the room. This solution is quick and easy to install as a DIY project, the sound insulation performance of this ceiling panel can be increased 4-6dB by combining the panels with soundbreaker bars.
We manufacture all our wall and ceiling panels and supply direct to trade
and public customers, keeping down costs which we can than pass on to our
customers. Our technical team are ready to help with your enquiries call 08451 306269 for help and advice on
products, installation and quotations Mon-Fri 8.30am-5.00pm.
The NSSC2 panels can be screwed directly into existing ceiling joists using dry wall screws. The boards can be cut to any shape using a hand saw or jigsaw. If you are installing this panel with the soundbreaker bars they should fastened to the joists at 300-350m centres, when you screw the panels into the bars do not screw into existing joists as this will reduce the effectiveness of the bars. Leave a 3-5mm gap around the perimeter of the ceiling to reduce sound transmission from the walls, ensure you use acoustic sealant to seal the edges of the boards and the perimeter.
- Dimensions 1200mm x 1200mm
- Thickness 28mm
- Weight 40kg
Sound Reduction 14dB
- Two layers of acoustic plasterboard bonded to a 2.5mm layer of high density mass loaded vinyl
This item is delivered on a pallet.