Ceiling Systems 3
Ceiling System 3 is used to increase the sound insulation of an existing ceiling. Increase the soundproofing of your ceilings, but don’t want to remove the existing ceiling. The combination of Soundbreaker bars, Noisestop1+ panel and acoustic sealant supplied with this system to reduce impact and airborne noise. Apply this system to ceilings with timber joists and concrete ceilings that have timber battens attached to hold the existing plasterboard. Upgrade existing ceilings in flats that need extra sound insulation against noise from above.
You do not need to remove existing ceilings to install this system, attach the Soundbreaker bars through the ceiling into the joists, bars should be spaced at 300-350mm centres, using dry wall screws fix the Noisestop1+ panel into the Soundbreaker bars, try to avoid screwing into the joists as this can minimise the performance of the soundproofing. Seal the edges of the boards with the acoustic sealant, try to leave a 3-5mm gap around the perimeter of the ceiling to reduce sound transmission from the walls, fill the gap with acoustic sealant.
- Ceiling Height Loss 35mm (includes)
- Sound Reduction
- 25dB airborne noise
- 14dB impact noise
For enquiries please call 01423 339163, or send us a message via our contacts page.