Noisedeck 32 is an interlocking floating floor system designed to reduce sound transmission through existing applications. Suitable for laying over an existing sub floor as part of a system to comply with Building Regulations. It consists of 18mm moisture resistant chipboard bonded to a 14mm triple layered acoustic composite. Floating floors will increase the noise reduction of separating floors to meet Part E as well as offering high levels of sound insulation in music rooms and home cinemas.
Product Specification Noisedeck 32
Noisedeck 32 combines 18mm moisture resistant chipboard bonded to a layer of 14mm acoustic foam and rubber. The acoustic layer consists of two layers of high grade foam either side of a 5mm layer of high density rubber.
Installation of Noisedeck 32
Noisedeck boards should be installed as a floating floor. Lay over an existing floor or directly to the joists in a brick bond pattern. Before the boards are laid an isolating tape should be stuck around the edge of the room where the flooring will meet the walls. Isolating the floor from the walls will reduce sound transfer along the floor and into the walls, reducing the possibility of flanking noise. The boards have a tongue and groove edge on four sides which will interlock. Ensure each edge has wood glue applied to it before locking them together. Wipe away any excess glue as you go. Once the boards are installed you are now ready to lay your final floor finish. If you are installing this flooring in a new build or conversion you should have the sound test done before the final floor finishes are installed. This could save time and money having to remove them so the floor can be tested.
For enquiries please call 01423 339163, or send us a message via our contacts page.