Name: Part E Noisedeck 32 Flooring &amp; Ceiling System
SKU: 010007-1-1-1
Availability: InStock

Part E compliant floor and ceiling solution combined to ensure you meet the Part E requirements

Part E Noisedeck 32 Flooring & Ceiling System

Pass the sound test requirements in the Part E document using this complete floor and ceiling soundproof system. The system combines all the required elements to exceed the required levels and ensures that expensive retests and remedial work are unnecessary to correct a failed sound test.

The system features the Noisedeck 32 interlocking floating floor, designed to meet impact sound insulation test requirements. Install the Noisedeck 32 directly over the floor joists.

Additionally, the Soundbreaker Bar resilient channel isolation system decouples the ceiling from the joists, reducing sound transfer between floors.

Other components of the soundproofing system increase mass and density, enhancing the ceiling’s ability to block sound transmission between rooms. The DFM acoustic insulation and soundproof plasterboards ensure compliance with and exceed Part E Building Regulation standards.

Perfomance

Airborne 56dB

Impact 53dB

System thickness

32mm interlocking flooring direct to joist/42mm from the ceiling joist

Noisedeck 32 & ceiling system

Timber joist soundproofing solution to meet Part E

Part E performance standards

Dwelling-houses and flats – performance standards for separating walls, separating floors, and stairs that have a separating function	Airborne sound insulation DnT,w + Ctr dB (Minimum values)	Impact sound insulation L'nT,w dB (Maximum values)
Purpose built dwellings house & flats
Walls	45dB	-
Floors & stairs	45dB	62
Dwelling-houses and flats formed by material change of use
Walls	43dB	-
Floors & stairs	43dB	64
Rooms for residential purposes – performance standards for separating walls, separating floors, and stairs that have a separating function
Purpose built rooms for residential purposes
Walls	43dB	-
Floors & stairs	45dB	62
Rooms for residential purposes formed by material change of use
Walls	43dB	-
Floors & stairs	43dB	64

It is important to note that when comparing the values, your separating solution must have a noise reduction level higher than the minimum airborne figure and a lower figure for the impact value. The higher the airborne rating, the better; the lower the impact rating, the better the solution performs.

Materials supplied with this system:

Noisedeck 32
100mm DFM acoustic insulation
Soundbreaker bars 3m
12.5mm Acoustic plasterboard (two layers) 2400mm x 1200mm (2.88sqm)

Floor materials:

Noisedeck 32 – 32mm interlocking T&G floating floor system

Ceiling materials:

Acoustic insulation 100mm/60kg/m3 – High-density sound insulation slabs
Soundbraker bars 3m – Decoupling channel to isolate the stud frame from the boarding
12.5mm Acoustic plasterboard (two layers) 2400mm x 1200mm (2.88sqm) – Denser than standard plasterboard

Select the required sqm area from the dropdown box at the top of the page to see the quantities supplied with this system.

We recommend ordering areas individually and adding them to the basket rather than adding them to one large area. You can order multiple areas in the same order.

Noisedeck 32 & Ceiling System

Airborne sound insulation values

RW 63dB
RW+Ctr 56dB

Part E Building Regulations requires a minimum value of at least 43-45dB

Impact sound insulation values

Ln,w 53dB

Part E Building Regulations requires a maximum permitted value of between 62-64dB

Note: Every 10 decibels(dB) reduction in noise level is roughly perceived as a halving of the perceived loudness. So, for instance, if you have a sound that measures 70dB and it decreases to 60dB, it would sound about half as loud to the human ear. Decibels explained.

The Part E Noisedeck 32 & Ceiling System is designed for timber joist floors and ceilings.

Fitting overview

For more information on fitting the individual components, see the product pages, Materials supplied with this system section.

Lay the Noisedeck 32 directly over the floor joists in a broken brick bond pattern. The boards are fitted onto the joist without mechanical fixings. Apply wood glue along the T&G edges to secure.
The cavity between the floor and ceiling is insulated with 100mm DFM acoustic insulation slabs. Sound insulation slabs cut larger than the opening of the joist will friction fit inside the cavity.
Affix Soundbreaker bars to the ceiling joist at approximately 400mm centres. The resilient channels are run perpendicular to the joist direction and are attached by screwing them into the joist along the pre-drilled holes along one edge of the bar.

The soundproof plasterboard layer is then screwed into the soundbreaker bar. Affixing them into the wide corrugated section with drywall screws. Both layers of plasterboard are screwed into the Soundbreaker bars.
Once installed, the ceiling can be plastered or taped and filled before decorating.

Due to the nature of most of the materials we supply, orders are typically delivered on pallets.

All orders will be wrapped, protected, and secured to the pallet to ensure they arrive in the best possible condition. Goods will be delivered as near to the property as possible. The drivers will not be able to carry orders into your property.

Deliveries are made between 8am and 6pm, Monday to Friday.

Once an order has been placed, you will be notified of the expected delivery date. Please ensure someone is available to sign for the delivery.

We charge a flat delivery rate of £60 plus VAT for palletised deliveries. We do not charge per pallet, no matter how many pallets are used to deliver your order.

Orders placed for items weighing less than 20kg will be sent via courier for £20 plus VAT.

We have a high stock level, so we typically deliver orders in approximately three working days.

If you want to speak to us regarding your delivery, please call 01423 339163.

Please check out our full delivery terms for more details.

Delivery Information