Description
Soundsoft Wall Panels
Noisestop Soundsoft Wall Panels are made from a sound absorbing mineral fibre core board faced with a thin, high-density, impact resistant mineral fibre panel. The composite panel has reinforced edges and is completely wrapped with an acoustically transparent fabric. The Designer panels are fitted using concealed fixings on the rear and absorb high levels of reflected noise to create a more comfortable acoustic environment.
Each panel absorbs high levels of sound and significantly reduces reverberation. It is available in a wide range of sizes and offers:
- Aesthetic effect – For use where overall wall coverage is not a practicality or a requirement
- Design flexibility – Can create separate stand-alone feature panels or banks of panels in different colours
- High quality decorative finish
- Simple installation
Applications
- Commercial premises
- High traffic public areas
- Call centres
- Offices and conference centres
- Reception areas
- Education facilities
- Health care buildings
- Recording studios
- Theatres, cinemas and auditoriums
Colour and Finish
Cara, Lucia and Lucia CS fabric ranges are available as standard in a wide range of colours. Alternatively, SoftSound® Designer Panels can be covered with a client’sown choice of fabric, subject to it being of a suitable quality and having the required acoustic properties.
Operating Temperature
Suitable for use at normal building temperatures.
Fire Performance
Cara, Lucia and Lucia CS fabrics meet the requirements of Class 1 Surface Spread of Flame when tested to BS476: Part7: 1997 (As Amended). The composite panels have not been fire tested.
Thermal Conductivity
0.033 W/mK @ 10OC
Packaging, Handling and Storage
SoftSound® panels are packed vertically on the long edge, covered in bubble wrap and delivered on non-returnable wooden pallets. They can be packed on wooden crates on request.
Panels should be stored inside and under cover in a dry, well- ventilated area protected from dirt and dust. Pallets and crates should be kept level and not double-stacked. Extreme care should be taken when handling to avoid damage.
Application and Fixing
SoftSound® Designer Panels are fixed via concealed Z-Clips or VELCRO® brand hook and loop fasteners (VELCRO® is a registered trade mark of Velcro Industries B.V.) or similar on the rear of the panel. For areas where multiple panels are being used, it is recommended that a minimum 15mm shadow gap is maintained.
Care and Maintenance
SoftSound® Designer Panels can be cleaned periodically with a low powered vacuum cleaner. Under no circumstances should they be cleaned using water. Stains can be treated with an appropriate cleaning solution applied in accordance with the manufacturer’s instructions.
SoftSound® Designer Panels are available to order and should be fitted by skilled tradesmen or specialist contractors.
Acoustic Performance
Thickness mm |
Sound Absorption Coefficient (BS EN ISO 354) | * Absorber Class | |||||
125 Hz |
250 Hz | 500 Hz | 1000 Hz | 2000 Hz |
4000 Hz |
||
25 |
0.10 | 0.45 | 0.88 | 1.00 | 1.00 | 1.00 |
C |
50 | 0.40 | 0.95 | 0.90 | 0.95 | 1.00 | 1.00 |
A |
* Absorber Classifications tested in accordance with BS EN ISO 11654:1997.
Our friendly experts are on hand to discuss all your soundproofing needs. Get in touch with the team online or give us a call on 01423 339 163 today.