Noisestop1+ Panel

0 out of 5

£30.97 ex. VAT

Noisestop1+ is one of our slimmest soundproofing panels, at only 18mm thick, and can be applied to stud frames, ceiling joist, soundbreaker bars or on to existing walls and ceilings.

The panel combines acoustic plasterboard and a 5mm layer of mass loaded barrier mat. As a stand alone panel the Noisestop1+ will block lower levels of sound, combine with DFM insulation and soundbreaker bars to form an effective soundproof wall or ceiling for high levels of noise reduction. This panel is supplied with all our wall and ceiling systems.

Product Download pdf.

Size: 1200mm x 1200mm x 18mm (1.44m²) £21.50 per m²

Call 01423 339163 for all enquiries. FREE DELIVERY ON ORDERS OVER £750ex.VAT

Categories: Ceilings, Walls
Compare

Description

Noisestop1+ Panel

Combines a 12.5mm acoustic plasterboard with a layer of 5mm mass loaded barrier mat. The acoustic membrane bonded to this panel adds to the mass of the panel. It also absorbs vibration which reduces the amount of sound transfer between rooms.

  • 18mm x 1200mm x 1200mm (1.44m²)
  • Use on party walls, stud walls and ceilings
  • Reduce airborne noise between rooms up to 42dB
  • Suitable for plastering

Fitting the Noisestop1+ Panel

The Noisestop1+ Panel can be fitted directly onto party walls, for best results we recommend using this product with a stud frame. Using DFM acoustic insulation and soundbreaker Bars will ensure a greater level of soundproofing.

You should always use AC50 acoustic sealant around the perimeter of the wall and on the edge of each panel. One standard tube of sealant should be enough for five panels.

Reduce flanking transmission by using DFM acoustic insulation between floor and ceiling joists.

Fitting the Noisestop1+ Panel Directly to a Wall

Attach the Noisestop1+ Panel directly to your wall using suitable screws and plugs. Alternatively use an adhesive on flat surfaces.

Fitting the Noisestop1+ Panel to a Stud Wall

You can either fix the Noisestop1+ Panel directly on to a stud frame, or for better results use the Soundbreaker Bars. If you are soundproofing an existing stud wall  fix the panel over the existing plasterboard. For the best results remove one side of the plasterboard. Replace the existing insulation with DFM acoustic insulation. Fasten the Soundbreaker Bars to the stud frame and then fix the Noisestop1+ Panel to the bars.

To soundproof a party wall we recommend using the Noisestop1+ Panel as part of a combination of products. Noisestop Systems supply wall soundproofing kits that we recommend for use on party walls, Wall System 1 or Wall System 2.

Fitting the Noisestop1+ Panel to Ceilings

The Noisestop1+ Panel can be used to overboard existing ceilings. Alternatively this panel can be combined with other products to offer higher levels of soundproofing. Combine with DFM acoustic insulation and Soundbreaker Bars. Noisestop Systems supply complete ceiling kits which utilise this panel, Ceiling System1, Ceiling System 2 and Ceiling System 3.

Direct to wall soundproofing comparison table

Direct to wall soundproofing solutions

ProductType of noiseSystems thicknessNoise reduction
Noisestop Acoustic PanelClearly audible noise, loud conversation22.5mm50dB
Noisestop1Low level noise, for higher results results use as part of a wall system15mm39dB
Noisestop1+Low level noise, for higher results results use as part of a wall system. Supplied with all our soundproofing kits18mm42dB
Noisestop2+General domestic background noise improved performance30mm48dB
Noisestop2Normal conversation and background noise28mm45dB

For enquiries please call 01423 339163, or send us a message via our contacts page.

Additional information

Weight28 kg
Size

1200mm x 1200mm

Thickness

18mm

Area coverage

1.44m²

Sound reduction dB

42dB

Weight

27kg

You may also like…

  • Noisestop panel
    Sale!

    Noisestop Acoustic Panel

    £42.00 £40.18 ex. VAT
    0 out of 5

Subscribe to Our Newsletter

Never miss our great deals. Huge sale every week!

X