Plasterboard Adhesive 25kg
Plasterboard adhesive bonds all types of plasterboards and acoustic panels to wall surfaces. A general based adhesive for use with all of our plasterboard products including the Noisestop 2 and Noisestop 2+ panels. Can be used on high, medium or low suction backgrounds.
- Mix the adhesive in bucket with water until you have a thick creamy consistency, this can be checked by placing some of the mix on to a trowel if it is still runny you should add more adhesive to thicken the mix until it is stiff
- Using a trowel you can then ‘dab’ the adhesive on to the wall the size of the dabs should be about the size of a fist and about 12 inches apart, for the direct to wall panels such as the Noisestop2 and Noisestop2+ panels you should have a row of four dabs and a row of three dabs per board
- Once the wall has been dabbed you can then apply the panel to the wall ensuring you leave a small gap from the floor, wall or ceiling that you can later fill with an acoustic sealant
One 25kg bag covers an area of 6-8m².