Description
Smart Tack Adhesive 500ml
Smart Tack Adhesive spray bonding system uses superior technology to outperform conventional contact adhesives. It’s the perfect adhesive solution for bonding our Noisestop Acoustic Panel, Noisestop 1 and Noisestop 1+ to your walls during home soundproofing projects.
Smart Tack Adhesive produces fine strands of high solid adhesive with a web-like appearance that bonds panels to walls when sprayed.
A 500ml aerosol will cover 8-10m² when applied to both surfaces.
To use
For best results, apply to both surfaces. Always apply to laminate first and spray one surface horizontally and one surface vertically. Set spray bandwidth by turning nozzle to H (high) M(medium) or L(low) positions depending on the width of the glue band required. Spray at a distance of approximately 15cm (6 inches) from the substrate. Apply an even coat, ensuring 80-100% coverage.
Avoid localized spraying as this will allow the adhesive to puddle, which can cause unevenness and “show” through the laminate trim or cause blistering or peeling. One coat is normally sufficient per side for non-porous substrates. A second coat is recommended on porous substrates. Allow the adhesive to tack up and protect from contamination (dust etc.) whilst this happens.
Smart Tack is normally ready for bonding within 3-5 minutes at 20°C/50% relative humidity and may be left open for up to 2 hours before bonding. Ensure there are no wet patches of adhesive remaining before bonding.
Need help with your soundproofing call 01423 339163, alternatively send us your enquiry. You can upload any relevant documents such as plans, drawings and pictures.