Smart Tack Adhesive 500ml
Advanced spray bonding system forming a web pattern on application.
Smart Tack is an advanced spray bonding system that outperforms conventional contact adhesives, providing significant performance and time saving application benefits.
Based on new technology resins, Smart Tack is applied by spray and provides very fine strands of “high solids” adhesive that forms a web type pattern on application.
Use Smart Tack Adhesive as a direct bond to the wall surface. Use Smart Tack to bond the following panels directly to a wall.
A 500ml aerosol will cover 8-10m² when applied to both surfaces.
Apply to both surfaces. Always apply to laminate first and spray one surface horizontally and one surface vertically. Set spray band width by turning nozzle to H (high) M(medium) or L(low) positions depending on width of glue band required. Spray at a distance of approx. 15cm (6 inches) from the substrate. Apply an even coat ensuring 80100% coverage.
Avoid localized spraying as this will allow the adhesive to puddle which in turn can cause unevenness and can “show” through the laminate trim or cause blistering or peel. One coat is normally sufficient per side for non porous substrates. A second coat is recommended on porous substrates. Allow the adhesive to tack up and protect from contamination (dust etc) whilst this happens.
Smart Tack is normally ready for bonding within 3-5 minutes at 20°C/50% relative humidity and may be left open for up to 2 hours before bonding. Ensure there are no wet patches of adhesive remaining before bonding.