Use the shower pump kit to soundproof small enclosures to effectively reduce unwanted noise. Use this combination of materials to reduce unwanted noise form noisy shower pumps and other small domestic household appliances.
- Eggbox Foam 2m x 1m x 30mm
- Barrier Shield 5mm/10kg/m³ 1200mm x 1200mm
- Smart Tack Adhesive 500ml
- AC50 Acoustic Sealant 380ml
Fitting these materials into your enclosure
Incorporate the materials inside your shower pump kit enclosure. Build the enclosure from ply-wood or MDF or a similar material.
Line the inside of the enclosure with the materials supplied with this kit. Apply the barrier Shield first to the inside panels using the Smart Tack Adhesive. Apply the Eggbox Foam over the Barrier Shield using the Smart Tack Adhesive. If possible mount the pump on top of the material to help isolate the pump.
It is important that the Barrier Shield is applied first and the Eggbox Foam second. the foam absorbs sound that bounces around inside the enclosure, this is absorbed by the Eggbox Foam.
You should cover as much of the sides and top of the enclosure as possible. Remember to leave space around the pump to allow for air flow.